LACO Technologies TITAN VERSA C - Communication Settings; High-Flow Evac Options

6 OPERATION
90 TITAN VERSA Operations and Maintenance Manual LACO Technologies
High-Flow Evac Options
Step
Option
Comments
Rough
High-Flow Evac and LD Rough
High-Flow Evac only
Better for processes that may contaminate
the leak detector.
Test
LD Test only
LD Test and High-Flow Evac
This condition is referred to split flow. User
should use Machine Factor adjustment.
Remote Screen Enter if the Remote Screen accessory is attached.
Communication Settings
Serial Baud Rate Enter the desired baud rate for both the RS232 and RS485 communication methods.
Available baud rates are 9600 (default), 19200, 57600, and 115200.
All communication adheres to the following additional serial settings:
• Bits: 8
• Parity: None
• Stop Bit: 1
See the Terminal Testing section for more information on this feature.