6 OPERATION
76 TITAN VERSA Operations and Maintenance Manual LACO Technologies
➔ To access Data Log settings, go to either Test Settings or Test Quick-Access.
The three data logging methods are:
• Test Summary
• Stream
• Cycle Combo (Test Summary and Stream during test cycle)
Test Summary Method The Test Summary Method logs a row of test summary data at the end of a test cycle or
aborted test cycle.
➔ The first time a Test summary log occurs, a new TestSummary.csv file is created
and appears on the USB drive. Subsequent test cycles add additional rows to the
existing csv file.
➔ Enter any Test ID data that is desired before running the leak test (see Test ID ).
Entered data will be logged.
➔ The Test Summary Method is ideal for users requiring traceability for their leak
test application.
To enable the Test Summary Method:
4. Select Test Summary from the log method and press the Data Log Enable button.
5. When in a test cycle is in process, the Data Log icon will flash with a T symbol.
Additionally, the bottom the test screen will read “Data Logging Active”.
6. The data is logged at the end of the test cycle.
Test Summary Field Description
To Next Page
Loading...
