LACO Technologies TITAN VERSA C - Electrical Power Connection; Electrical Interfaces

5 INSTALLATION
32 TITAN VERSA Operations and Maintenance Manual LACO Technologies
NOTICE: Equipment damage can occur due to incorrect supply voltage
An incorrect supply voltage may damage the device.
1. Check whether the supply voltage specified on the TITAN VERSA product label
matches the supply voltage available on site. Verify the available power source
matches product voltage.
2. Connect the device to the electric power supply using the supplied power cable.
Electrical interface connections are located on the right side of all TITAN VERSA
configurations. Table 13 summarizes all the interfaces, connection specifications, parts,
and accessories used with each connection.