2 SAFETY
4 TITAN VERSA Operations and Maintenance Manual LACO Technologies
• Operate the device only when it is in technically perfect, working order.
• Operate the device only as specified in a safety-conscious and hazard-conscious
manner, and in compliance with these operating instructions.
• Keep this manual accessible at the equipment location.
• Adhere to the following regulations and monitor their compliance:
o Intended use
o Safety and accident prevention regulations
o International, national, and local standards and guidelines
o Additional provisions and regulations that are specific to the model
o Use of original parts or parts approved by the manufacturer
Personnel qualifications
• Allow only qualified service technicians to work with and on the device.
Qualified service technicians must receive training on the device.
• Allow personnel in training to work with and on the device only under the
supervision of trained qualified service technicians.
• Before starting work, ensure authorized personnel read and understand the
operating instructions and all other applicable documents (see Reference
Documents), especially the information regarding safety, maintenance, and repairs.
• Define the responsibilities, authorizations, and supervision of personnel.
• Read, observe, and follow the information in these operating and working
instructions. Operators must take special care to understand and heed safety
instructions and warnings.
• Carry out work only with adherence to the complete operating instructions.
• If you have further questions regarding the TITAN VERSA operation or
maintenance, please contact LACO customer service:
o Phone: 801-486-1004 | Toll Free: 800-465-1004
o Email: Technical Support: techsupport@lacotech.com
To Next Page
Loading...