3 TRANSPORT AND STORAGE
LACO Technologies TITAN VERSA Operations and Maintenance Manual 9
Replace Lifting Hardware (VERSA T and L)
1. Detach yellow lift strap and D-rings from lifting bolts.
2. Unscrew lifting bolts and store with strap in lifting kit bag.
3. Locate two M8 flanged screws inside of lifting kit bag and insert where lifting bolts
were located.
Transporting on Mobile Cart
Never move unit while the detector is on. Unit is safe to move once the unit has been
off for five minutes and turbo pump has safely spun down.
Store the device under the following conditions:
• Ambient temperature
• A cool, dry place
• Ensure the inlet test port is blanked off with a KF-25 blank
To Next Page
Loading...
