2 SAFETY
LACO Technologies TITAN VERSA Operations and Maintenance Manual 3
Safety
The TITAN VERSA Leak Detector measures and locates leaks on components,
assemblies, and systems. It is suited for both vacuum and sniffer test methods.
The TITAN VERSA Leak Detector may only be used for leak testing of gases specified in
Technical Data.
To ensure safety:
• Install, operate, and service the TITAN VERSA Leak Detector (i.e., device) only in
compliance with the operating instructions outlined in this manual.
• Do not suck up liquids with the device.
• Do not suck up aggressive, corrosive, chemical, flammable, toxic, or explosive
substances.
• Do not suck up dusts or solids.
NOTICE: Improper use will cause all claims for liabilities and warranties to
be forfeited.
Improper use is defined as usage for purposes deviating from the intended
uses stated above, especially:
• Pumping harsh, chemical, corrosive, flammable, reactive, toxic, or explosive
fluids
• Pumping of liquids
• Pumping of condensing vapors
• Pumping dust or solids particles
• Operation in potentially explosive areas
• Analysis of gas with a hydrogen concentration higher than 5%
• Testing parts that are soiled or that have traces of water, vapors paint,
adhesive, detergent or rinsing products
• Use of accessories or spare parts that are not named in this manual
Safe Operation The product is not designed to carry people or loads, and is not intended for use as a
seat, stepladder, or any other similar purpose.
To Next Page
Loading...
