LACO Technologies TITAN VERSA C

To Next Page

To Previous Page

2 SAFETY

6 TITAN VERSA Operations and Maintenance Manual LACO Technologies

WARNING: Damage from vapors

If condensable gases or vapors are measured, there is a risk of pump corrosion

and damage.

• Do not immediately switch off the device after the measurement. Allow

device to run in "Background cleanup" mode for at least an additional 20

minutes. Only then will the pump oil be free of condensed vapors.

WARNING: Overpressure

Overpressure may destroy the vacuum pump, the vacuum system, and the

gaskets.

• Do not create an overpressure with the device.

• Only use the device for leak testing.

WARNING: Halogens in gas

If gas whose molecules contain halogen is measured with the device, the

cathode layer of the ion source may be attacked. This may result in the burning

out of the cathode.

• Do not test gas whose molecules contain halogens such as fluorine or

chlorine.

LACO Technologies TITAN VERSA C - Page 16