Safety Decals CareSafety Decals Care
1. Keep safety decals and signs clean and legible at all
times.
2. Be familiar with the content and position of each
safety decal. Decals include important information.
3. Replace decals and signs that are missing or
become impossible to read.
4. When replacing parts that display a safety decal,
ensure that the new part is tted with a decal as well.
5. Obtain replacement safety decals or signs from
your authorized dealer.
Decal ApplicationDecal Application
Be sure that the installation area is clean and dry. Use
hot, soapy water to clean the surface where the decal
will be applied.
1. Thoroughly dry the surface.
2. Measure and t decal before removing the paper
backing.
3. For decals with no top protection paper, remove the
smallest split-backed paper.
4. Align decal over the specied area and carefully
press exposed portion into place.
5. Slowly remove the remaining backing and carefully
smooth the remaining portion of the decal into
place.
6. Small air pockets can be pierced with a pin and
smoothed using a piece of the decal backing.
Safety
LeeBoy 8608 Commercial Paver1-12
To Next Page
Loading...
