55
Maintenance
LeeBoy 8608 Commercial Paver 5-5
MAINTENANCE SCHEDULE
Before performing any maintenance procedures on
the LeeBoy Model 8608 Commercial Paver, review the
safety information in Section 1. Refer to the Engine
Operator’s Manual accompanying your paver for more
detailed engine service information.
Always use the appropriate and
correct sized tools for the task at hand to prevent
damage or possible injury.
When performing any routine
maintenance, always include the previous routine
maintenance hours in the higher hourly schedule.
Table 5-1.Periodic Maintenance Schedule
SYSTEM ITEM
Every 10 Hours
Daily
Every 50 Hours
Weekly
Every 100 Hours
Monthly
Every 250 Hours
Quarterly
Every 500 Hours
Semi-Annually
Every 1000 Hours
Annually
Paver Lubricate paver. X
Engine
Check oil level. X
Check coolant level. X
Replace coolant. X
Check air lter. X
Change air lters. X
Replace fuel lter. X
Change oil and oil lter. (Initial 50 Hours) X
Check engine belt adjustment. X
Replace engine belt. X
Check DEF tank uid level. Fill if needed. X
Adjust generator belt. X
Hydraulic
Check hydraulic oil level. X
Change hydraulic oil. X
Change hydraulic lter. X
Check torque hub oil. X
Change torque hub oil. X
Drain hydraulic tank. Replace strainer. X
Mechanical
Adjust conveyor drive chains. X
Adjust conveyor ight chains. X
Adjust auger chains. X
Adjust screed extension top guide. X
Every 1500
Hours
Replace oil separator element. Contact your authorized dealer to check engine injector tip, PCV (Positive
Crankcase Ventilation) valve, and EGR cooler.
Every 3000
Hours
Contact your authorized dealer to check EGR system and turbo-charger.
To Next Page
Loading...
