Press the DOWN (V) arrow to scroll to the remainder of
the messages. (Figures 4-45 to 4-47)
Figure 4-45. Secondary DPF Notication Screen
It is imperative that the operator follow the instructions
shown on the third message: During this process: DO
NOT move machine out of park or neutral. DO NOT
touch the accelerator pedal/lever. DO NOT turn the
engine off or stop the regeneration process.
Figure 4-46. Third DPF Notication Screen
When you scroll down to the fourth message, the soft
key banner at the bottom of the screen will change,
offering the ability to Request Regen(Button #4).
(Figure 4-47)
Figure 4-47. Fourth DPF Request Regen Screen
4. Press the “Request Regen” button (#4).
• The engine speed will increase and there
may be a noticeable sound difference. This is
normal. The Parked Regeneration Occurring
icon will appear (Figure 4-48). The HEST
icon will also illuminate when the exhaust
temperature reaches >842° F. Both alerts will
stay on during the regeneration process.
Figure 4-48. Fourth DPF Request Regen Screen
Operation
8608 Commercial Paver4-22
To Next Page
Loading...
