Maintenance Precautions
• DO NOT attempt repairs unless trained to do so.
Refer to manuals and experienced repair personnel
for help.
• Before working on the machine, securely block the
machine and any components that may fall. Block
any working components to prevent unexpected
movement while repairs are being made.
• Always wear safety glasses and other required safety
equipment when servicing or making repairs.
• Disconnect battery before working on the electrical
system.
• Avoid lubrication or mechanical adjustments while the
paver is in motion or while engine is operating.
• If lubrication or mechanical adjustment is necessary,
use extreme caution and complete the following
steps:
1. Place Forward/Reverse control in neutral.
2. Apply neutral lock.
3. Lower screed to ground.
4. Shut off engine.
5. Place equipment in a safe position.
6. Securely block wheels and tracks.
• Never make repairs on pressurized components such
as uid lines, the gas system, or mechanical items until
the pressure has been relieved.
• When servicing or replacing hardened pins, use a
brass drift or other suitable material between the
hammer and pin.
• Keep brake and steering systems in good operating
condition.
• Safety signs that are missing, illegible or damaged
must be replaced. Keep all safety signs clean.
Storage Precautions
• Store paver in an area away from human activity.
• Do not permit children to play on or around the stored
machine. Serious injury or death can occur from
improper/unauthorized use of the machine.
• Make sure the unit is stored on a surface that is rm,
level, and free of debris.
• Store the machine inside a building or cover securely
with a weatherproof tarpaulin.
LeeBoy 8616B Conveyor Paver1-12
To Next Page
Loading...
