LeeBoy 8616B - Fuel System; Fuel Tank; Change Air Filter

LeeBoy 8616B Conveyor Paver5-18
Change Air Filter
Never operate the engine without an
air lter installed. Severe damage to the machine will
occur.
Air
Filter
Cover
Figure 5-17. Air Filter Cover
To change the air lter elements:
1. Unclamp and remove air lter cover. (Figure 5-17)
2. Remove the primary and secondary air lter
elements. Discard.
3. Clean the inside of the air cleaner body with a clean
cloth.
4. Install new air lter elements inside the canister.
5. Reclamp cap onto the air lter cover.
6. Check clamps to ensure lter elements are tight and
lter elements are making proper contact.
7. Start engine. If engine does not run smoothly,
recheck lter element contact.
FUEL SYSTEM
Fuel Tank
The fuel level is indicated on the digital display fuel
gauge. Use only diesel fuel and always ll the fuel tank
full.
Fill up with diesel fuel at the end of the
day to reduce condensation in the tank.
Diesel fuel is highly FLAMMABLE.
DO NOT smoke while lling the fuel tank. Fill the
fuel tank in a designated area that provides proper
ventilation with a re extinguisher available.
Explosion Hazard! Never ll the fuel
tank near an open ame, or near equipment that can
create sparks. Never check fuel level or fuel system
components near an open ame.
Fuel
Cap
Figure 5-18. Fuel Cap
To ll the fuel tank:
1. Stop engine.
2. Remove fuel cap from fuel tank.
3. Fill with diesel fuel until full.
4. Replace fuel cap.