Power Crown Option
The Power Crown Switch option automatically adjusts
the positive or negative crown as needed.
Figure 4-31. Power Crown Option
Umbrella Option
The umbrella kit option provides shelter from sun and
other weather conditions for the operator. The umbrella
kit assembly includes the mounting bracket and
umbrella frame assembly that can be mounted on either
side of the operator platform. (Figure 4-32)
Umbrella
Mounts
Figure 4-32. Umbrella Mount Locations
Truck Hitch Attachment Option
The truck hitch is an optional attachment thatt prevents
excessive and uneven braking from the paving material
truck. (Figure 4-33)
Figure 4-33. Truck Hitch Attachment Option
To engage the hitch with the rear wheels of the asphalt
truck:
1. Extend the arm extensions of the truck hitch by
pushing and holding theTruck Hitch button in the
OUT position.
2. The paving material truck then SLOWLY backs up to
the paver until the hitch makes contact with the rear
tires of the truck.
3. Retract the arm extension by pushing and holding
the Truck Hitch switch in the IN position until both
guide rollers are fully locked onto the truck wheel
rims.
4. It may be necessary to adjust the roller guides to the
inside of the wheel rims.
Operation
LeeBoy 8616B Conveyor Paver4-22
To Next Page
Loading...
