June 2018
Legrand PDU User Guide 113
To view this OCP's RMS current chart:
This OCP's data chart is shown in the Overcurrent Protector History section.
To retrieve the exact data at a particular time, hover your mouse over the data line in the chart. Both
the time and data are displayed as illustrated below.
To configure this OCP's threshold settings:
By default, upper thresholds of an OCP's RMS current have been configured. See Default Voltage and
Current Thresholds (on page 479). You can modify them as needed.
Note: The threshold values set for an individual OCP will override t
he bulk threshold values st
ored on that
particular OCP. To configure thresholds for multiple OCPs at a time, see OCPs (on page 110).
1. Click the Thresholds title bar at the bottom of the page to display the threshold data.
To Next Page
Loading...
