LEGRAND PDU - Inlet Pole Sensor Threshold Information

June 2018
282 Legrand PDU User Guide
Sensor type Description
displacementPowerFa
ctor
Displacement power factor sensor
phaseAngle Inlet phase angle sensor
Inlet Pole Sensor Threshold Information
This command syntax shows the specified inlet pole sensor's threshold-related information.
# show sensor inletpole <n> <p> <sensor type>
To show detailed information, add the parameter "details" to the end of the command.
# show sensor inletpole <n> <p> <sensor type> details
Variables:
 <n> is the number of the inlet whose pole sensors you want to query. For a single-inlet PDU, <n> is
always 1.
 <p> is the label of the inlet pole whose sensors you want to query.
Pole Label
<p>
Current sensor Voltage sensor
1
L1
L1 L1 - L2
2
L2
L2 L2 - L3
3
L3
L3 L3 - L1
 <sensor type> is one of the following sensor types:
Sensor type Description
current Current sensor
voltage Voltage sensor
activePower Active power sensor
apparentPower Apparent power sensor
powerFactor Power factor sensor
activeEnergy Active energy sensor