LEGRAND PDU - Server Reachability Configuration Commands

June 2018
Legrand PDU User Guide 377
Server Reachability Configuration Commands
You can use the CLI to add or delete an IT device, such as a server, from the server reachability list, or
modify the settings for a monitored IT device. A server reachability configuration command begins with
serverReachability.
Adding a Monitored Device
This command adds a new IT device to the server reachability list.
config:# serverReachability add <IP_host> <enable> <succ_ping>
<fail_ping> <succ_wait> <fail_wait> <resume> <disable_count>
Variables:
 <IP_host> is the IP address or host name of the IT device that you want to add.
 <enable> is one of the options: true or false.
Option Description
true Enables the ping monitoring feature for the newly
added device.
false Disables the ping monitoring feature for the newly
added device.
 <succ_ping> is the number of successful pings for declaring the monitored device "Reachable." Valid
range is 0 to 200.
 <fail_ping> is the number of consecutive unsuccessful pings for declaring the monitored device
"Unreachable." Valid range is 1 to 100.
 <succ_wait> is the wait time to send the next ping after a successful ping. Valid range is 5 to 600
(seconds).
 <fail_wait> is the wait time to send the next ping after a unsuccessful ping. Valid range is 3 to 600
(seconds).
 <resume> is the wait time before the Legrand PDU resumes pinging after declaring the monitored device
"Unreachable." Valid range is 5 to 120 (seconds).
 <disable_count> is the number of consecutive "Unreachable" declarations before the Legrand PDU
disables the ping monitoring feature for the monitored device and returns to the "Waiting for reliable
connection" state. Valid range is 1 to 100 or unlimited.
Deleting a Monitored Device
This command removes a monitored IT device from the server reachability list.
config:# serverReachability delete <n>
Variables:
 <n> is a number representing the sequence of the IT device in the monitored server list.
You can find each IT device's sequence number using the CLI command of show
serverReachability as illustrated below.