June 2018
Legrand PDU User Guide 385
Turning Off the Outlet(s)
This section applies to outlet-switching capable models only.
This command turns off one or multiple outlets.
# power outlets <numbers> off
To quicken the operation, you can add the parameter "/y" to the end of the command, which confirms the
operation.
# power outlets <numbers> off /y
Variables:
<numbers> is one of the options: all, an outlet number, a list or a range of outlets.
Option Description
all Switches OFF all outlets.
A specific outlet
number
Switches OFF the specified outlet.
A comma-
separated list of
outlets
Switches OFF multiple, inconsecutive or
consecutive outlets.
For example, to specify 7 outlets -- 2, 4, 9, 11, 12,
13 and 15, type outlets 2,4,9,11-13,15.
A range of
outlets with an
en dash in
between
Switches OFF multiple, consecutive outlets.
For example, to specify 6 consecutive outlets -- 3,
4, 5, 6, 7, 8, type outlets 3-8.
If you entered the command without "/y", a message appears, prompting you to confirm the operation. Then:
Type y to confirm the operation, OR
Type n to abort the operation
To Next Page
Loading...
