June 2018
Legrand PDU User Guide 291
Reliability Error Log
This command shows the reliability error log.
# show reliability errorlog <n>
Variables:
<n> is one of the options: 0 (zero) or any other integer number.
Option Description
0 Displays all entries in the reliability error log.
Tip: You can also type the command without
adding this option "0" to get all data.
A specific
integer number
Displays the specified number of last entries in the
reliability error log.
Examples
This section provides examples of the show command.
Example 1 - Basic Security Information
The diagram shows the output of the show security command.
To Next Page
Loading...
