June 2018
Legrand PDU User Guide 287
Existing User Profiles
This command shows the data of one or all existing user profiles.
# show user <user_name>
To show detailed information, add the parameter "details" to the end of the command.
# show user <user_name> details
Variables:
<user_name> is the name of the user whose profile you want to query. The variable can be one of the
options: all or a user's name.
Option Description
all This option shows all existing user profiles.
Tip: You can also type the command
without adding this option "all" to get the
same data.
a specific user's name This option shows the profile of the
specified user only.
Displayed information:
Without the parameter "details," only four pieces of user information are displayed: user name, user
"Enabled" status, SNMP v3 access privilege, and role(s).
With the parameter "details," more user information is displayed, such as the telephone number, e-mail
address, preferred measurement units and so on.
Existing Roles
This command shows the data of one or all existing roles.
# show roles <role_name>
Variables:
<role_name> is the name of the role whose permissions you want to query. The variable can be one of
the following options:
Option Description
all This option shows all existing roles.
Tip: You can also type the command
without adding this option "all" to get the
same data.
a specific role's name This option shows the data of the specified
role only.
Displayed information:
Role settings are displayed, including the role description and privileges.
To Next Page
Loading...
