June 2018
Legrand PDU User Guide 319
Enabling or Disabling Service Advertising
This command enables or disables the zero configuration protocol, which enables advertising or auto
discovery of network services. See Enabling Service Advertising (on page 164) for details.
config:# network services zeroconfig enabled <option>
Variables:
<option> i
s one of the options: true or false.
Option Description
true The zero configuration protocol is enabled.
false The zero configuration protocol is disabled.
Examples
This section illustrates several network configuration examples.
Example 1 - Networking Mode
The following command enables the wired networking mode.
config:# network mode wired
Example 2 - Enabling Both IP Protocols
The following command determines that both IPv4 and IPv6 protocols are enabled.
config:# network ip proto both
Example 3 - Wireless Authentication Method
The following command sets the wireless authentication method to PSK.
config:# network wireless authMethod PSK
Example 4 - Static IPv4 Configuration
The following command enables the Static IP configuration mode.
config:# network ipv4 ipConfigurationMode static
Time Configuration Commands
A time configuration command begins with time.
To Next Page
Loading...
