June 2018
276 Legrand PDU User Guide
Option Description
snmp Only displays the SNMP settings.
modbus Only displays the settings of the Modbus/TCP
service.
zeroconfig Only displays the settings of the zero configuration
advertising.
PDU Configuration
This command shows the PDU configuration, such as the device name, firmware version and model type.
# show pdu
To show detailed information, add the parameter "details" to the end of the command.
# show pdu details
Outlet Information
This command syntax shows the outlet information.
# show outlets <n>
To show detailed information, add the parameter "details" to the end of the command.
# show outlets <n> details
Variables:
<n> is one of the options: all, or a number.
Option Description
all Displays the information for all outlets.
Tip: You can also type the command without
adding this option "all" to get the same data.
A specific outlet
number
Displays the information for the specified outlet
only.
Displayed information:
Without the parameter "details," only the outlet name is displayed. For outlet-switching capable models,
the outlet state is also displayed.
With the parameter "details," more outlet information is displayed in addition to the outlet name, such as
the outlet rating.
To Next Page
Loading...
