June 2018
100 Legrand PDU User Guide
2. Click the desired sensor (required), and then click Edit Thresholds.
3. Make changes as needed.
To enable any threshold, select the corresponding checkbox.
Type a new value in the accompanying text box.
For concepts of thresholds, deassertion hysteresis and assertion timeout, see Sensor Threshold
Settings (on page 473).
4. Click Save.
Outlets
The Outlets page shows a list of all outlets and the overview of outlet status and data. To open this page,
click 'Outlets' in the Menu (on page 84).
On this page, you can:
Vie
w all outlets' status.
Each outlet's data is displayed, such as receptacle type and outlet lines. On an outlet-switching capable
model, each outlet's power state is also shown.
To Next Page
Loading...
