June 2018
Legrand PDU User Guide 277
Inlet Information
This command syntax shows the inlet information.
# show inlets <n>
To show detailed information, add the parameter "details" to the end of the command.
# show inlets <n> details
Variables:
<n> is one of the options: all, or a number.
Option Description
all Displays the information for all inlets.
Tip: You can also type the command without
adding this option "all" to get the same data.
A specific inlet
number
Displays the information for the specified inlet only.
An inlet number needs to be specified only when
there are more than 1 inlet on your PDU.
Displayed information:
Without the parameter "details," only the inlet's name and RMS current are displayed.
With the parameter "details," more inlet information is displayed in addition to the inlet name and RMS
current, such as the inlet's RMS voltage, active power and active energy.
Overcurrent Protector Information
This command is only available for models with overcurrent protectors for protecting outlets.
This command syntax shows the overcurrent protector information, such as a circuit breaker or a fuse.
# show ocp <n>
To show detailed information, add the parameter "details" to the end of the command.
# show ocp <n> details
Variables:
<n> is one of the options: all, or a number.
Option Description
all Displays the information for all overcurrent
protectors.
Tip: You can also type the command without
adding this option "all" to get the same data.
To Next Page
Loading...
