LEGRAND PDU - Page 378

June 2018
378 Legrand PDU User Guide
Modifying a Monitored Device's Settings
The command to modify a monitored IT device's settings begins with serverReachability modify.
You can modify various settings for a monitored device at a time. See Multi-Command Syntax (on page
381).
 Modify
a device's IP address or host name:
config:# serverReachability modify <n> ipAddress <IP_host>
 Enable or disable the ping monitoring feature for the device:
config:# serverReachability modify <n> pingMonitoringEnabled <option>
 Modify the number of successful pings for declaring "Reachable":
config:# serverReachability modify <n> numberOfSuccessfulPingsToEnable
<succ_number>
 Modify the number of unsuccessful pings for declaring "Unreachable":
config:# serverReachability modify <n> numberOfUnsuccessfulPingsForFailure
<fail_number>
 Modify the wait time after a successful ping:
config:# serverReachability modify <n> waitTimeAfterSuccessfulPing
<succ_wait>
 Modify the wait time after a unsuccessful ping:
config:# serverReachability modify <n> waitTimeAfterUnsuccessfulPing
<fail_wait>
 Modify the wait time before resuming pinging after declaring "Unreachable":
config:# serverReachability modify <n> waitTimeBeforeResumingPinging
<resume>
 Modify the number of consecutive "Unreachable" declarations before disabling the ping
monitoring feature:
config:# serverReachability modify <n> numberOfFailuresToDisable
<disable_count>
Variables:
 <n> is a number representing the sequence of the IT device in the server monitoring list.
 <IP_host> is the IP address or host name of the IT device whose settings you want to modify.
 <option> is one of the options: true or false.
Option Description
true Enables the ping monitoring feature for the
monitored device.
false Disables the ping monitoring feature for the
monitored device.