June 2018
Legrand PDU User Guide 211
If wanted, you can resort the list by clicking the desired column header. See Sorting a List (on page 86).
To make the Event Context Information disappear, click anywhere inside the browser's window.
The following are placeholders that can be used in custom messages.
Placeholder Definition
[ACTIVEINLET] The label of the newly activated inlet
[AMSBLADESLOTPOSITION] The (horizontal) slot position, an action applies to
[AMSLEDCOLOR] The RGB LED color
[AMSLEDMODE] The LED indication mode
[AMSLEDOPMODE] The LED operating mode
[AMSNAME] The name of an asset strip
[AMSNUMBER] The numeric ID of an asset strip
[AMSRACKUNITPOSITION] The (vertical) rack unit position, an action applies to
[AMSSTATE] The human readable state of an asset strip
[AMSTAGID] The asset tag ID
[CARDREADERID] The id of a card reader
[CIRCUITCTRATING] The circuit CT rating
[CIRCUITCURRENTRATING] The circuit current rating
[CIRCUITNAME] The circuit name
[CIRCUITPOLE] The circuit power line identifier
[CIRCUITSENSOR] The circuit sensor name
[CIRCUIT] The circuit identifier
[CONFIGPARAM] The name of a configuration parameter
[CONFIGVALUE] The new value of a parameter
[DATETIME] The human readable timestamp of the event
occurrence
[DEVICEIP] The IP address of the device, the event occurred on
[DEVICENAME] The name of the device, the event occurred on
[DEVICESERIAL] The unit serial number of the device the event
occurred on
[ERRORDESC] The error message
[EVENTRULENAME] The name of the matching event rule
[EXTSENSORNAME] The name of a peripheral device
[EXTSENSORSLOT] The ID of a peripheral device slot
[EXTSENSOR] The peripheral device identifier
[IFNAME] The human readable name of a network interface
[INLETPOLE] The inlet power line identifier
[INLETSENSOR] The inlet sensor name
[INLET] The power inlet label
To Next Page
Loading...
