LEGRAND PDU - Page 309

June 2018
Legrand PDU User Guide 309
Setting the Authentication Method
This command sets the wireless authentication method to either PSK or Extensible Authentication Protocol
(EAP).
config:# network wireless authMethod <method>
Variables:
 <method> is one of the authentication methods: PSK or EAP.
Method Description
PSK The wireless authentication method is set to PSK.
EAP The wireless authentication method is set to EAP.
Setting the PSK
If the Pre-Shared Key (PSK) authentication method is selected, you must assign a PSK passphrase by using
this command.
config:# network wireless PSK <psk>
Variables:
 <psk> is a string or passphrase that consists of:
- 8 to 63 characters
- No spaces
- ASCII codes 0x20 ~ 0x7E