June 2018
Legrand PDU User Guide 311
<option2> is one of the options: true or false.
Option Description
true Always make the wireless network connection
successful even though the TLS certificate chain
contains any certificate which is outdated or not
valid yet.
false The wireless network connection is NOT
successfully established when the TLS certificate
chain contains any certificate which is outdated or
not valid yet.
<option3> is one of the options: true or false.
Option Description
true Make the wireless network connection successful
when the Legrand PDU system time is earlier
than the firmware build before synchronizing with
the NTP server, causing the TLS certificate to
become invalid.
false The wireless network connection is NOT
successfully established when the Legrand PDU
finds that the TLS certificate is not valid due to
incorrect system time.
EAP CA Certificate Example
This section provides a CA certificate example only. Your CA certificate contents should be different from the
contents displayed in this example.
To provide a CA certificate:
1. Make sure you have entered the configuration mode. See Entering Configuration Mode (on page 293).
2. Type the following
command and press Enter.
config:# network wireless eapCACertificate
3. The system prompts you to enter the contents of the CA certificate.
4. Open a CA certificate using a text editor. You should see certificate contents similar to the following.
To Next Page
Loading...
