June 2018
Legrand PDU User Guide 315
Changing the Telnet Configuration
You can enable or disable the Telnet service, or change its TCP port using the CLI commands.
A Telnet command begins with network services telnet.
Enabling or Disabling Telnet
This command enables or disables the Telnet service.
config:# network services telnet enabled <option>
Variables:
<option> is one of the options: true or false.
Option Description
true The Telnet service is enabled.
false The Telnet service is disabled.
Changing the Telnet Port
This command changes the Telnet port.
config:# network services telnet port <n>
Variables:
<n> is a TCP port number between 1 and 65535. The default Telnet port is 23.
Changing the SSH Configuration
You can enable or disable the SSH service, or change its TCP port using the CLI commands.
An SSH command begins with network services ssh.
Enabling or Disabling SSH
This command enables or disables the SSH service.
config:# network services ssh enabled <option>
Variables:
<option> is one of the options: true or false.
Option Description
true The SSH service is enabled.
false The SSH service is disabled.
To Next Page
Loading...
