LEGRAND PDU - Page 317

June 2018
Legrand PDU User Guide 317
Enabling or Disabling SNMP v3
This command enables or disables the SNMP v3 protocol.
config:# network services snmp v3 <option>
Variables:
 <option> is one of the options: enable or disable.
Option Description
enable The SNMP v3 protocol is enabled.
disable The SNMP v3 protocol is disabled.
Setting the SNMP Read Community
This command sets the SNMP read-only community string.
config:# network services snmp readCommunity <string>
Variables:
 <string> is a string comprising 4 to 64 ASCII printable characters.
 The string CANNOT include spaces.
Setting the SNMP Write Community
This command sets the SNMP read/write community string.
config:# network services snmp writeCommunity <string>
Variables:
 <string> is a string comprising 4 to 64 ASCII printable characters.
 The string CANNOT include spaces.
Setting the sysContact Value
This command sets the SNMP MIB-II sysContact value.
config:# network services snmp sysContact <value>
Variables:
 <value> is a string comprising 0 to 255 alphanumeric characters.
Setting the sysName Value
This command sets the SNMP MIB-II sysName value.
config:# network services snmp sysName <value>
Variables:
 <value> is a string comprising 0 to 255 alphanumeric characters.