LEGRAND PDU - Page 347

June 2018
Legrand PDU User Guide 347
Changing Measurement Units
You can change the measurement units displayed for temperatures, length, and pressure for a specific user
profile. Different measurement unit commands can be combined so that you can set all measurement units
at a time. To combine all commands, see Multi-Command Syntax (on page 381).
Note: The m
easur
ement unit change only applies to the web interface and command line interface.
Tip: To set the default measurement units applied to the Legrand PDU user interfaces for all users via CLI,
see Setting Default Measurement Units (on page 349).
 Set the preferred temperature unit:
config:# user modify <name> preferredTemperatureUnit <option1>
Variables:
 <name> is the name of the user whose settings you want to change.
 <option1> is one of the options: C or F.
Option Description
C This option displays the temperature in Celsius.
F This option displays the temperature in
Fahrenheit.
 Set the preferred length unit:
config:# user modify <name> preferredLengthUnit <option2>
Variables:
 <name> is the name of the user whose settings you want to change.
 <option2> is one of the options: meter or feet.
Option Description
meter This option displays the length or height in
meters.
feet This option displays the length or height in feet.
 Set the preferred pressure unit:
config:# user modify <name> preferredPressureUnit <option3>
Variables:
 <name> is the name of the user whose settings you want to change.
 <option3> is one of the options: pascal or psi.
Option Description
pascal This option displays the pressure value in Pascals
(Pa).
psi This option displays the pressure value in psi.