LEGRAND PDU - Page 350

June 2018
350 Legrand PDU User Guide
config:# user defaultpreferences preferredPressureUnit <option3>
Variables:
 <option3> is one of the options: pascal or psi.
Option Description
pascal This option displays the pressure value in Pascals
(Pa).
psi This option displays the pressure value in psi.
Examples
This section illustrates several user configuration examples.
Example 1 - Creating a User Profile
The following command creates a new user profile and sets two parameters for the new user.
config:# user create May enable admin
Results:
 A new user profile "May" is created.
 The new user profile is enabled.
 The admin role is assigned to the new user profile.
Example 2 - Modifying a User's Roles
The following command assigns two roles to the user "May."
config:# user modify May roles admin,tester
Results:
 The user May has the union of all privileges of "admin" and "tester."
Example 3 - Default Measurement Units
The following command sets all default measurement units at a time.