LEGRAND PDU - Page 446

June 2018
446 Legrand PDU User Guide
Step B: Configure Connection Policies and Standard Attributes
You need to configure the following for connection request policies:
 IP address or host name of the Legrand PDU
 Connection request forwarding method
 Authentication method(s)
 Standard RADIUS attributes
 Presumptions in the illustration:
 IP address of your Legrand PDU = 192.168.56.29
 Local NPS server is used
 RADIUS protocol selected on your Legrand PDU = CHAP
 Existing role of your Legrand PDU = Admin
 Illustration:
1. Open the NPS console, and expand the Policies folder.