June 2018
Legrand PDU User Guide 85
Menu Information shown
OCPs
The OCPs menu item displays only when there are overcurrent protectors
implemented on your model.
OCP status and settings, such as OCP thresholds.
See OCPs (on page 110).
Peripherals Status and settings of Raritan environmental sensor packages, if connected.
See Peripherals (on page 116).
Webcams
The 'Webcams' menu item appears when there is any webcam(s)
connected to the Legrand PDU, or when there are snapshots saved onto
the Legrand PDU already.
Webcam live snapshots/video and webcam settings.
See Webcam Management (on page 247).
SmartLock
-- and/or --
Card Readers
Either or both menu items appear when you connect the equipment
included in a Raritan's SmartLock kit to Legrand PDU. For details, refer to
the user documentation accompanying the SmartLock kit or download it
from Legrand's Support page (http://www.raritan.com/support/).
SmartLock: Configures and controls the door handles connected to
Legrand PDU via DX2-DH2C2. Note that this page is not available if
connecting the door handles to other Raritan sensors than DX2-DH2C2.
Card Readers: Lists the card readers connected to Legrand PDU directly
or indirectly.
See SmartLock and Card Reader (on page 257).
User Management Data and settings of user accounts and groups, such as password change.
See User Management (on page 130).
Device Settings Device-related settings, including network, security, system time, event rules
and more.
See Device Settings (on page 139).
Maintenance Device information and maintenance commands, such as firmware upgrade,
device backup and reset.
See Maintenance (on page 230).
To Next Page
Loading...
