Lenze 8600 series - Dancer-Position Control; Application Examples; Winding Drives

9
Dancer-Position control
9.1 Application examples
9.1.1 Winding drives
l Dancer-Position control with and without diameter Pilot control of
centre winder
- Winding and unwinding of different materials, e.g. wire,
textiles, foils, Paper, ribbon
- Operation as Single winder and as tandem winder (two drives
to one shaft) is possible
l Dancer-Position control for surface winders
- Unwinders and rewinders
With/without
dIameter/
distance sensor
Dancer-controlled centre winderkiancer-controller surface winder
Dancer-controlled centre winder (tandem winder)
102