Lenze 8600 series - Table of Contents

Table of contents
Planning
l Feiatures of the 8600 series variant dancer-Position control
9
2 Technical data
11
2.1 General data
2.2 Dimensions
2.3 Scope of delivery
2.4 Application as directed
2.5 CE conformity
2.51 EC Low-Voltage Directive (73/23/EEC)
2.5.2 Electromagnetit Compatibility (89/336/EEC)
11
12
12
13
14
15
16
3 Application-specific controller selection 19
3.1 Applications with extreme overload, peak torque up to
230% of the rated motor torque
3.2 Applications with high overload, peak torque up to 170 % of
19
the rated motor torque
3.3 Applications with medium overload, peak torque up to
20
135 % of the rated motor torque 21
4 Handling 22
4.1 Mechanical installation 22
4.2 Electrical installation 23
4.2.1 Motor protection 24
4.22 Installation in compliance with EMC
24
4.2.:3 CE-typical drive System
25
4.2.4 Switching on the motor side 27
5 Wiring
28
5.1 Power connections
5.1 .l Tightening torques of the power terminals
5.2 Control connections
52.1 Analog inputs and Outputs
52.2 Further inputs and Outputs
5.2.3 Description of the analog inputs and Outputs
5.2.4 Description of further inputs and Outputs
5.2.5 Digital inputs and Outputs
5.2.6 Description of the digital iunputs and Outputs
5.2.7 Frequency output 6, fd
5.3 Operation with DC-bus supply
5.3.1 Connection of several drives
5.3.2 DC-voltage supply
5.4 Screenings
5.5 Grounding of control electronics
28
29
29
30
30
31
31
32
34
35
36
36
36
37
37
lenze
3