Lenze 8600 series - Tightening Torques of the Power Terminals; Control Connections

-
5.1.1 Tightening torques of the power terminals
Type 8601...8605 8606,8607
8608...8611 8612,8613 8614,8615
Tightening 0.6...0.8 Nm 1.2...1.5 Nm
1.5...1.8 Nm 6...8 Nm 15...20 Nm
torque (5.3...7.1 Ibfin) (10.6...13.3 Ibfin) (13.3...16 Ibfin) (53,..70Ibfin)
(133...177 Ibfin)
5.2 Control connections
Layout:
,:T
EB 39 40 41 44 45 KIlK14Al
x3
x4
Xl to x4: Control terminals
x5:
Input of digital frequency/incremental encoder
X6:
LECOM interface (RS232/485)
X8: 2nd input of digital frequency/incremental encoder
(Option)
x9: Output of digital frequency (Option)
Xl 0, Xl 1:
Field bus connections
(Option, e.g. 2110lB for InterBus-S)
Vl, v2;
Displays for field bus Options
Note
-
Always connect the plug-in terminals (accessory kit) to the plug
connectors Xl to X4.
When not using the interface plugs (plug-in connectors) X5 and X6
protect them with the supplied covers.
lt is possible to Change the functions of cetiain control terminals
using switches (See chapters 5.2.1 to 5.2.7, page 30ff). To adjust
the switches, remove the cover of the device.
In addition to this, there are numerous possibilities to Change the
inputs and Outputs of the device using Codes (See page 81ff).
-
29