Lenze 8600 series - Applications with High Overload, Peak Torque up to 170 % of the Rated Motor Torque

3.2
Applications with high overload,
peak torque up to 170 % of the rated motor torque
- For applications which require a Standard
overload behaviour of a controller (e.g. general
mechanical engineering, hoists, travelling drives,
calenders).
- The controller provides 150% of the rated torque for
a maximum of 30s.
For cyclic overload, the ratio overload to cycle time
must not exceed 0.1.
- For this application, the monitoring of the output
current is set to Operation with increased power
using the Codes Cl 19 and Cl20 (see page 82)
- Please note that a maximum ambient temperature
of 45°C is permissible.
TYQe
Order no. Rated
motor
power
kW
8606 EVF8606-E-V009 7.5
6607 EVF8607-EA'009 11.0
8608 EVF86IWE4'009 15.0
8609 EVF8609-E-V009 18.5
8610 EVF8610-E-V009 22.0
8611 EVF8611-E-V009 30.0
8612 EVF6612-E-V009 37.0
~~
M,
Mt
lncontrol
-
20
-