Lenze 8600 series - Application as Directed

-
-
2.4 Application as directed
The 8200 series consists of electrical devices which are designed
for application in industrial power installations.
The controllers are directed
- as components for the control of variable Speed drives with
AC motors
- for the installation into control cabinets or control boxes
- as controllers for the installation of drive Systems
The controllers comply with the protection requirements of the
EC Low-Voltage Directive.
Drive Systems with 8600 controllers which are assembled
according to the requirements for CE-typical drive Systems (see
chapter 4.2.2) comply with the EC EMC Directive.
The CE-typical drive Systems with the 8600 controllers are
intended
- for the Operation at public and non-public mains
- for the application in industrial, commercial and residential
areas
The CE-typical drive Systems are not suited for the connection
to IT mains (mains without earth-potential reference) because of
the earth-potential reference of the RFI filter.
The controllers are not appliances but directed as components
to be assembled into drive Systems for industrial use.
The controllers themselves do not form machines for the
purpose of the EC Machinery Directive.
lenze
13