Lenze 8600 series - EC Low-Voltage Directive (73;23;EEC)

-
2.5.1 EC Declaration of Conformity ‘95
for the purpose of the
EC Low-Voltage Directive (73/23/EEC)
amended by:
CE mark directive (93/68/EEC)
The controllers of the 8600 series were developed, designed, and
manufactured in compliance with the above-mentioned EC directive
under the sole responsibility of
Lenze GmbH & Co KG, Postfach 101352, D-31763 Hameln
The compliance with the protective requirements of the above
mentioned EC directive was confirmed by the award of the VDE-
EMC label of the accredited test laboratory VDE Prüf- und
Zertifizierungsinstitut, Offenbach.
Standards and regulations considered:
DIN VDE 0160
5.88
+ Al 14.69
+ A2.110.66
Electronie equipment for use in electrical power installation
prDIN EN 50176
Classification
VDE0160/11.94
DIN VDE 0100
EN 60529
IEC 249 / 1 1 OB6
IEC 249 / 2-15 / 12/89
IEC 326 / 1 IO/90
EN 60097 / 9.93
DIN VDE 0110
/l-2 /1/89 1201 EU90
Standards for the erection of power installations
Degrees of protection
Base material for printed circuits
Printed circuits, printed boards
Creepage distances and clearances
Hameln, 27/11/1995
lsnze
15