Lenze 8600 series - Page 9

12 Serial intetfaces
12.1 LECOMI interface X6
12.2 LECOM2 interface (Option)
12.3 LECOM Codes
12.3.1 Controller address
12.3.2 Operating state
12.3.3 Controller state
12.3.4 Pole pair number
12.3.5 Baud rate (LECOMl)
12.3.6 History of reset faults
12.3.7 Code bank (LECOMI)
12.3.8 Enable automation interface (LECOM2)
12.3.9 High resolution data
12.4 Attribute table
Service
1 Fault indication
2 Warning
3 Monitoring
4 Checking the power Stage
4.1 Checking the mains rectifier
4.2 Checking the power Stage
4.3 Checking the voltage supply on the control board 8602MP
Index
7