This Manual for the Drive PLC Developer Studio as from V01.00 is valid for the following
Lenze automation systems:
Automation system Type as from hardware version as from software version
9300 Servo PLC EVS93XX-xl 2l 02
9300 Servo PLC EVS93XX-xT 2K 10
Important Note :
The software is made available to the user in the currently existing form. All risks with regard to the quality and the results arising from its
use remain the responsibility of the user. The user must implement the appropriate security precautions against possible erroneous
application.
We do not accept any responsibilty for direct or consequential damages, such as loss of profits, loss of orders, or effects on the course of
business of any kind.
.
2000 Lenze GmbH &Co KG
No part of this documentation may be copied or made available to third parties without the express written permission of
Lenze GmbH & Co KG.
We have takegreatcare inassemblingtheinformationinthisdocumentation, andcheckedthatitcorrespondstothe hardware andsoftware
that is described. Nevertheless, we cannot guarantee that there are no discrepancies. We do not accept any legal responsibility or liability
for damage that may thereby ensue. Any necessary corrections will be implemented in subsequent versions.
Windows,WindowsNTandMS-DOSare either registered trademarksortrademarksofMicrosoft Corporationinthe United States and/orother
countries.
IBM and VGA are registered trademarks of International Business Machines, Inc.
All other designations are trade names of their owners.
Version 1.4 09/2000 TD27
To Next Page
Loading...
Need help?
General