INFORMATION
● Pressing the camera switch when the shift position is in "R" enables you to change to
panoramic view & wide front view.
● The display position of the Lexus parking assist-sensor may not match the position of
the obstacle displayed in the camera image.
WARNING
● The position of the guide lines displayed on the screen may change due to factors
such as number of passengers, load capacity, and road gradient. Always make sure to
visually check behind you and your surroundings while you are driving.
● The Lexus parking assist-sensor, RCTA (Rear Crossing Traffic Alert), RCD (Rear
Camera Detection), and the moving objects alert displays are overlapped and dis-
played on the camera image, so it may be difficult to see depending on the brightness
of the surroundings and colors.
Related Links
Changing the guide line display mode(P. 304)
Auto display mode(P. 298)
Changing the panoramic view monitor settings(P. 318)
Moving objects alert(P. 316)
Changing the guide line display mode
The guide line display mode changes every time you touch the guide line switching
button.
■ Estimated course lines mode
This mode displays estimated course lines that move in accordance with the
operation of the steering wheel.
*2 : This function is not made available in some countries or areas.
8-2. Panoramic view monitor
304
To Next Page
Loading...
