NOTICE
Do not strike or hit the washer nozzle or subject it to a strong impact, as the washer
nozzle installation position and angle may be changed.
Parking assist lights
The parking assist lights of the panoramic
view monitor system are installed in the
locations shown in the figure.
NOTICE
● Make sure to observe the following precautions, otherwise the panoramic view moni-
tor system may not operate correctly:
• Do not apply excessive force to a light or subject it to a strong impact. Doing so may
cause the position or installation angle of the light to deviate.
• Do not remove, disassemble, or modify the lights as they have a waterproof
construction.
• When cleaning the lights, wash them with a large amount of water, and then wipe
them with a soft wet cloth.
• Do not apply organic solvents, waxes, oil removing solvents, glass coatings, etc.
to the covers of the lights, as they are made of resin. If such is applied, remove it
immediately.
•
Do not expose the lights to sudden temperature changes, such as applying hot
water to them when it is cold.
•
When washing the vehicle with a high-pressure washer, do not spray water directly
on the lights or their surrounding area. High-pressure water can damage the lights
and cause them to not operate correctly.
● If a light has been subjected to a strong impact, it may be damaged. Have the
vehicle inspected by any authorized Lexus retailer or Lexus authorized repairer, or any
reliable repairer as soon as possible.
8-2. Panoramic view monitor
330
To Next Page
Loading...
