Lightware VINX-120-HDMI-ENC - LW3 System Commands; Product Info, Label, Reset, and Defaults Commands; Network Configuration Commands

6. Programmer's Reference  

6.4. System Commands
6.4.1. 
Command and Response
ç 
æ 
Parameters
The 
Example
ç 
æ 
6.4.2. Setting the Device Label
Unique name can be set which will be visible when the given device is listed in the built-in web page of other
VINX devices. Furthermore, the name is listed when browsing the client list of a DHCP server.
ATTENTION!  This property is a writable parameter and not the same as the ProductName.
Command and Response #label #devicelabel
ç 
æ 
Parameters
The 
truncated.
Example
ç 
æ 
6.4.3. 
Command and Response
ç 
æ 
Example
ç 
æ 
6.4.4. 
Command and Response#rmwareversion
ç 
æ 
Example
ç 
æ 
6.4.5. Resetting the Device
The extender can be restarted; the current connections (RS-232, USB, etc...) will be terminated.
Command and Response #reboot #restart #reset
ç 
æ 
Example
ç 
æ 
6.4.6. Restoring the Factory Default Settings
Command and Response #factory
ç 
æ 
Example
ç 
æ 
The device is restarted, the current connections are terminated, the default settings are restored. See the
complete list in the Factory Default Settings section.



