7. Firmware Upgrade VINX-1x0-HDMI Extenders – User's Manual 81
Device List
Legend of the Icons
IP address editor The IP address of the device can be changed in the pop-up window.
Identify me
which helps to identify the device phisically.
Favorite device
connected with that IP address, the star will highlighted in that line.
Further information
available
Device is unreachable. Change the IP address using the
Cleartext login
enabled
The password-protection is enabled. You have to enter the password
Update options window or in the
appearing window in the beginning of the upgrade.
Service mode The device is in bootload mode. Backup and restore cannot be
performed in this case.
7.7. The Upgrading Steps
ATTENTION!
upgrade. If any problem occurs, reboot the unit and restart the process.
been chosen in the parameters window, all device settings will be erased. In the case of factory reset, you
1. Create a backup
computer.
2. Start the Upgrade
3. Upgrade
4. Factory reset
If the factory default option is selected in the Parameters window, the conversion / restore procedure will not be
performed!
6. Finish
To Next Page
Loading...
