LOYTEC L-DALI - Page 346

L-DALI User Manual 346 LOYTEC
Version 5.2 LOYTEC electronics GmbH
Property Identifier
Property
ID
Property Datatype
Conformance
Code
Object_Identifier
75
BACnetObjectIdentifier
R
Object_Name
77
CharacterString
R
Object_Type
79
BACnetObjectType
R
Present_Value
85
REAL
R
Description
28
CharacterString
W
Status_Flags
111
BACnetStatusFlags
R
Event_State
36
BACnetEventState
R
Reliability
103
BACnetReliability
R
Out_Of_Service
81
BOOLEAN
W
Output_Units
82
BACnetEngineeringUnits
R
Manipulated_Variable_Reference
60
BACnetObjectPropertyReference
W
Controlled_Variable_Reference
19
BACnetObjectPropertyReference
W
Controlled_Variable_Value
21
REAL
W
Controlled_Variable_Units
20
BACnetEngineeringUnits
R
Setpoint_Reference
109
BACnetSetpointReference
W
Setpoint
108
REAL
W
Action
2
BACnetAction
R
Priority_For_Writing
88
Unsigned
W
COV_Increment
22
REAL
W
Profile_Name
168
CharacterString
R
Occupancy_Variable_Reference
537
BACnetObjectPropertyReference
W
Occupancy_Variable_Value
538
BOOLEAN
W
Mode
539
Unsigned
W
Hold_Time
540
Unsigned
W
Ignore_Time
541
Unsigned
W
Occupied_Level
542
REAL
W
Unoccupied_Level
543
REAL
W
Step_Value
544
REAL
W
On_Hysteresis
545
REAL
W
Off_Hysteresis
546
REAL
W
Off_Delay
547
Unsigned
W
On_Delay
548
Unsigned
W
Table 40: Properties of the Loop object representing a Constant Light Controller Application.
Object_Identifier (Read-Only)
The default instance number is BCC, where “B” is the DALI interface number (0-3) in
decimal, and “CC” is the Constant Light Controller instance on the channel (00-15).
Object_Name (Read-Only)
This property holds the name of the constant light controller.
Object_Type (Read-Only)
The value of this property is LOOP (12).