LUMENIS VersaPulse PowerSuite - Page 142

7528%/(6+227,1* 9HUVD3XOVHPowerSuite6HULHV6HUYLFH0DQXDO
 5(9%
TP24 MNDIF Main Energy Detector signal after Differential Amplifier
stage
TP26 /4MS/ LO for 4msec during each laser pulse then HI to reset the
peak detector
TP27 SENERG Safety energy signal after Peak/Hold Detector (Scope)
TP28 SFINT Safety Energy Detector signal after Integrator stage
TP29 /Q1/ LO for x msec during each laser pulse then HI to reset the
Peak/Hold Detector
TP30 TDAC Output of test DAC (0-10.24VDC)
TP31 -15/2 LVPS -15V monitor signal for ADC (-7.5±0.2VDC)
TP32 +15/4 LVPS +15V monitor signal for ADC (+5.0±0.1VDC)
TP33 +5V LVPS +5V Monitor signal for ADC (+5.0±0.1VDC)
TP34 WREST Water resistivity (VDC = 1/xM
:)
TP35 +15V LVPS +15V entrance to PCB (+15.0±0.4VDC)
TP36 SFVM Safety energy signal for voltmeter (DC level, 1.0V/J)
TP37 MNINT Main Energy Detector signal after integrator stage
TP38 MNVM Main Energy signal for voltmeter (DC level, 1.0V/J)
TP39 -15V LVPS -15V entrance to the PCB (-15±0.4VDC)
TP40 +24v LVPS +24V entrance to the PCB (+24.0V±1.0VDC)
TP41 TEMP Water Temperature (1.0VDC/10
qC)