Installation...Removing the shipping rails
1-10
LTO
1.2 REMOVING THE SHIPPING RAILS
1.2.1 CONDITIONS
The machine is placed on the workbench.
There is enough space around the machine.
1.2.1.1 PROCEDURE
To remove the shipping rails, follow the procedure below:
Flow chart 1-2: Removing the shipping rails
As shown...
Illustration 1-2: Removing the fixing screws from the shipping rails
#1 With the help of a second person, tip the machine gently to the rear in order
to gain access to the 4 rail fixing screws.
#2 With a 13 mm Allen wrench, take out the 4 fixing screws and remove the
rails.
#3 Keep the shipping rails with the rest of the packaging cartons.
To Next Page
