Luneau Technology Briot perception2 - Saving the New Configuration

Configuration...Configuration of general operating parameters
4-89
LTO
4.4.3 SAVING THE NEW CONFIGURATION
When you quit the screen, the message "Do you wish to save the new configuration?" is displayed.
You have three possibilities:
 Confirm the message: The configuration is taken into account and you return to the personalisation menu
access screen.
 Don't confirm the message: The configuration is not taken into account and you return to the
personalisation menu access screen. The previous setting is retained.
 Cancel the configuration: You return to the configuration screen. Reselect the operating parameters you
have chosen.
When you return to the application screen and begin an edging cycle, you will see that the general operating
parameters have been saved.