Luneau Technology Briot perception2 - Shape Creator Function; Presentation; Procedure

Using your Edger...Usual procedure
3-47
LTO
3.2.6 SHAPE CREATOR FUNCTION
3.2.6.1 PRESENTATION
This function may be used on a presentation lens that may be partly damaged, or to create an original shape.
To access this function, press the key
Screen 3-21 : Access screen to the SHAPE CREATOR function
3.2.6.2 PROCEDURE
3.2.6.2.1 BLOCKING THE AXIS SETTING CROSS
You are sent to the screen allowing you to enter the shape of your frame point by point.
You should first use the frame positioning support (perception2 only), and then center the frame and lock the axis
setting cross.
.
Screen 3-22 : Frame axis setting screen
Shape Creator
function
Lock the axis
setting cross